Products
We are dedicated to research, design, manufacture eddy current sensors, acceleration sensor,
s velocity displacement sensors and other measurement instruments.
Products
Number of views:
1000
ZA3401 Three-wire Axis Vibration Transducer
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
Product description
Parameters
ZA3401 integrate the function of proximitor and transducer . So for ZA3401, it only need probe and extension cable. Because of this reason, parts for monitor become less and reliability is enhanced.
Easy installation, no need for adjustment
Installation of ZA340l is very easy. You just put it in the place where the proximitor locates. More reliable screw wiring terminal is applied in ZA3401.
Measurement point of machine : one set of ZA3401 with X axis perpendicular to Y axis is required to installed close to the bearing. For rotating machine with double bearings, 4 set of vibrator is required.
High-reliability and Long Lifespan of Eddy Current Sensor System
ZA3401 can be connected to our 8mm eddy current senor probe. Adjust gap of eddy current senor by regulating gap voltage (GAP+、earthing point)10.0±0.5V.
Features:
Fault monitoring
Monitor radial vibration of rotating machinery rotor. Vibration increase caused by imbalance, misalignment, looseness of parts, damage of rolling bearing and damage of gear is monitored.
2 Measuring parameters : peak peak value of radial vibration( displacement)
3 Unit type: various kinds of rotating machinery with sliding bearing, like fans, compressors, motors, pumps, gear boxes and water turbines.
4. Installation requirements: it can be directly connected to eddy current probes and extension cable. You just put it in the place where the proximitor locates. Cooperation with main equipment supplier or designing office , or contacting us is required.
Output interface:
4-20mA Output (or 1-5V)
Original signal GAP Output
Technical parameters:
Electrical parameters:
1. Power :22-30VDC
2. Frequence response:(±3dB):5.0~1,000Hz
3. External probe: 8mm eddy current sensor
4. Buffered output(GAP):output of original signal
5. Sensitivity: 8.0mV/um (200mV/mil)
6. Total vibration output:(4~20mA), (or 1-5V)
7. Max. Load resistance: 600Ω :
Physical parameters:
Dimensions:78W×70L×37H(mm).Installed by slide guide DIN 35 or screws.
2. Weight:about 1 Kg
Atmosphere parameters:
Atmosphere temp. :-25℃~+65℃
Storage temp. : -40℃~+100℃
Humidity:up to 90% noncondensable
Installation of ZA transducer inside case enclosure is required.
Add:RM #3, F/3, Building A3, Medium-sized & Small Enterprise Promotion Park, Tianyuan Zone, Zhuzhou City, Hunan Province
TEL:
800-8788-929 / 86-731-22863360
EMAIL:
Copyrights:Zhuzhou Zhonghang Technology Development Co., Ltd 湘ICP备11000201号
Copyrights:Zhuzhou Zhonghang Technology Development Co., Ltd